The microphone is turned on and data from the microphone is sent to the Speech Recognition Service. A built in Silence Detector is applied to the microphone data before it is sent to the recognition service.

The microphone is turned off and the connection to the Speech Recognition Server is severed.

Gets an audio stream with no format specified. This method is used when the format information can be detected within the stream itself.

Gets an audio stream with the specified format. Use this method when sending raw audio samples.

Notify the server that client is done sending audio buffers to the Speech Recognition Service. This work is queued onto a background worker.

Send buffers of audio to the Speech Recognition Service.Note for wave files, you can just send data from the file right to the server. The audio must be PCM, mono, 16-bit sample, with sample rate of 8000 Hz or 16000 Hz. In the case you are not an audio file in wave format, and instead you have just raw data(for example audio coming over bluetooth), then before sending up any audio data with this method, you must first send up an SpeechAudioFormat descriptor to describe the layout and format of your raw audio data via DataRecognitionClient's sendAudioFormat() method. This work is queued onto a background worker.

If you are not sending up a audio file in wave format, and instead you have just raw data, then before sending up any audio data, you must first send up an SpeechAudioFormat descriptor to describe the layout and format of your raw audio data. The audio must be PCM, mono, 16-bit sample, with sample rate of 8000 Hz or 16000 Hz.