Last updated: 2018-09-17

workflowr checks: (Click a bullet for more information)

  • ✔ R Markdown file: up-to-date

    Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

  • ✔ Environment: empty

    Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

  • ✔ Seed: set.seed(20180626)

    The command set.seed(20180626) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

  • ✔ Session information: recorded

    Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

  • ✔ Repository version: decce81

    Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

    Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated: 
    
Ignored files:
    Ignored:    .Rhistory
    Ignored:    .Rproj.user/
    Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
Expand here to see past versions:
    File Version Author Date Message
    Rmd decce81 Xiang Zhu 2018-09-17 wflow_publish(“analysis/gene_set.Rmd”)
    html 32d3a60 Xiang Zhu 2018-09-16 Build site.
    Rmd 8572f1a Xiang Zhu 2018-09-16 wflow_publish(“analysis/gene_set.Rmd”) 
data/
├── README.md
├── biological_pathway
│   ├── gene_37.3.mat
│   └── pathway.mat
└── tissue_set
    ├── de_genes
    ├── he_genes
    └── se_genes

5 directories, 3 files

Biological pathways

The 3,913 GTEx biological pathway used in Zhu and Stephens (2017) are available in the folder biological_pathway, which are represented by two files gene_37.3.mat and pathway.mat.

The file gene_37.3.mat contains basic information of genes.

>> load gene_37.3.mat
>> gene
gene =
  struct with fields:
        id: [18732x1 double]
    symbol: {18732x1 cell}
       chr: [18732x1 double]
      desc: {18732x1 cell}
     start: [18732x1 double]
      stop: [18732x1 double]

>> [gene.id(10) gene.chr(10) gene.start(10) gene.stop(10)]
ans =
          18          16     8768444     8878432

>> gene.symbol(10)
ans =
  1x1 cell array
    {'ABAT'}

>> gene.desc(10)
ans =
  1x1 cell array
    {'4-aminobutyrate aminotransferase'}

Note that only 18,313 genes mapped to reference sequence were used in our analyses.

>> [min(gene.start) min(gene.stop)]
ans =
    -1    -1

>> inref_genes = ~(gene.start == -1 | gene.stop == -1);
>> sum(inref_genes)
ans =
       18313

The file pathway.mat contains basic information of pathways.

>> load pathway.mat
>> pathway
pathway =
  struct with fields:
       label: {4076x1 cell}
    database: {4076x1 cell}
      source: {4076x1 cell}
       genes: [18732x4076 double]
    synonyms: {4076x1 cell}

>> pathway.label(100)
ans =
  1x1 cell array
    {'Activation of NOXA and translocation to mitochondria'}

>> pathway.database(100)
ans =
  1x1 cell array
    {'PC'}

>> pathway.source(100)
ans =
  1x1 cell array
    {'reactome'}

Note that only 3,913 pathways with 2-499 mapped genes

>> numgenes = pathway.genes' * inref_genes;
>> size(numgenes)
ans =
        4076           1

>> paths    = find(numgenes > 1 & numgenes < 500);
>> size(paths)
ans =
        3916           1

Tissue-based gene sets

The 113 GTEx tissue-based gene sets used in Zhu and Stephens (2017) are available in the folder tissue_set. There are 44 “highly expressed” (HE) gene sets, 49 “selectively expressed” (SE) gene sets and 20 “distincttively expressed” (DE) gene sets. The creation of SE sets uses a method described in Yang et al (2018). The creation of DE sets uses a method described in Dey et al (2017).

      44
      49
      20

Each of the tissue-based gene sets has the following format.

ensembl_gene_id chromosome_name start_position  end_position
ENSG00000002933 7   150497491   150502208
ENSG00000072778 17  7120444 7128592
ENSG00000075624 7   5566782 5603415
ENSG00000087086 19  49468558    49470135

Note that the gene information of tissue-based sets was provided by the GTEx project, which may not be the same as gene_37.3.mat above.

Session information

R version 3.5.1 (2018-07-02)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS High Sierra 10.13.6

Matrix products: default
BLAS: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRblas.0.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.5/Resources/lib/libRlapack.dylib

locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

loaded via a namespace (and not attached):
 [1] workflowr_1.1.1   Rcpp_0.12.18      digest_0.6.17    
 [4] rprojroot_1.3-2   R.methodsS3_1.7.1 backports_1.1.2  
 [7] git2r_0.23.0      magrittr_1.5      evaluate_0.11    
[10] stringi_1.2.4     whisker_0.3-2     R.oo_1.22.0      
[13] R.utils_2.7.0     rmarkdown_1.10    tools_3.5.1      
[16] stringr_1.3.1     yaml_2.2.0        compiler_3.5.1   
[19] htmltools_0.3.6   knitr_1.20

This reproducible R Markdown analysis was created with workflowr 1.1.1