OCC.AppParCurves module¶

Parallel Approximation in n curves.This package gives all the algorithms used to approximate a MultiLinedescribed by the tool MLineTool.The result of the approximation will be a MultiCurve.

class AppParCurves_Array1OfConstraintCouple(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (AppParCurves_ConstraintCouple &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (AppParCurves_Array1OfConstraintCouple &) –
Return type:	AppParCurves_Array1OfConstraintCouple

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_ConstraintCouple

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (AppParCurves_ConstraintCouple &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (AppParCurves_Array1OfConstraintCouple &) –
Return type:	AppParCurves_Array1OfConstraintCouple

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_ConstraintCouple &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_ConstraintCouple

thisown¶: The membership flag

class AppParCurves_Array1OfMultiBSpCurve(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (AppParCurves_MultiBSpCurve &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (AppParCurves_Array1OfMultiBSpCurve &) –
Return type:	AppParCurves_Array1OfMultiBSpCurve

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiBSpCurve

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (AppParCurves_MultiBSpCurve &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (AppParCurves_Array1OfMultiBSpCurve &) –
Return type:	AppParCurves_Array1OfMultiBSpCurve

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_MultiBSpCurve &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiBSpCurve

thisown¶: The membership flag

class AppParCurves_Array1OfMultiCurve(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (AppParCurves_MultiCurve &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (AppParCurves_Array1OfMultiCurve &) –
Return type:	AppParCurves_Array1OfMultiCurve

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiCurve

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (AppParCurves_MultiCurve &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (AppParCurves_Array1OfMultiCurve &) –
Return type:	AppParCurves_Array1OfMultiCurve

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_MultiCurve &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiCurve

thisown¶: The membership flag

class AppParCurves_Array1OfMultiPoint(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (AppParCurves_MultiPoint &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (AppParCurves_Array1OfMultiPoint &) –
Return type:	AppParCurves_Array1OfMultiPoint

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiPoint

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (AppParCurves_MultiPoint &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (AppParCurves_Array1OfMultiPoint &) –
Return type:	AppParCurves_Array1OfMultiPoint

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_MultiPoint &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiPoint

thisown¶: The membership flag

class AppParCurves_ConstraintCouple(*args)¶

Bases: object

returns an indefinite ConstraintCouple.

Return type:	None

Create a couple the object <Index> will have the constraint <Cons>.

Parameters:	TheIndex (int) – Cons (AppParCurves_Constraint) –
Return type:	None

Constraint()¶

returns the constraint of the object.

Return type:	AppParCurves_Constraint

Index()¶

returns the index of the constraint object.

Return type:	int

SetConstraint()¶

Changes the constraint of the object.

Parameters:	Cons (AppParCurves_Constraint) –
Return type:	None

SetIndex()¶

Changes the index of the constraint object.

Parameters:	TheIndex (int) –
Return type:	None

thisown¶: The membership flag

class AppParCurves_HArray1OfConstraintCouple(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (AppParCurves_ConstraintCouple &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	AppParCurves_Array1OfConstraintCouple

ChangeArray1()¶

Return type:	AppParCurves_Array1OfConstraintCouple

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_ConstraintCouple

GetHandle()¶

Init()¶

Parameters:	V (AppParCurves_ConstraintCouple &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_ConstraintCouple &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_ConstraintCouple

thisown¶: The membership flag

class AppParCurves_HArray1OfMultiBSpCurve(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (AppParCurves_MultiBSpCurve &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	AppParCurves_Array1OfMultiBSpCurve

ChangeArray1()¶

Return type:	AppParCurves_Array1OfMultiBSpCurve

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiBSpCurve

GetHandle()¶

Init()¶

Parameters:	V (AppParCurves_MultiBSpCurve &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_MultiBSpCurve &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiBSpCurve

thisown¶: The membership flag

class AppParCurves_HArray1OfMultiCurve(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (AppParCurves_MultiCurve &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	AppParCurves_Array1OfMultiCurve

ChangeArray1()¶

Return type:	AppParCurves_Array1OfMultiCurve

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiCurve

GetHandle()¶

Init()¶

Parameters:	V (AppParCurves_MultiCurve &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_MultiCurve &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiCurve

thisown¶: The membership flag

class AppParCurves_HArray1OfMultiPoint(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (AppParCurves_MultiPoint &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	AppParCurves_Array1OfMultiPoint

ChangeArray1()¶

Return type:	AppParCurves_Array1OfMultiPoint

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiPoint

GetHandle()¶

Init()¶

Parameters:	V (AppParCurves_MultiPoint &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (AppParCurves_MultiPoint &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiPoint

thisown¶: The membership flag

class AppParCurves_MultiBSpCurve(*args)¶

Bases: OCC.AppParCurves.AppParCurves_MultiCurve

returns an indefinite MultiBSpCurve.

Return type:	None

creates a MultiBSpCurve, describing BSpline curves all containing the same number of MultiPoint. An exception is raised if Degree < 0.

Parameters:	NbPol (int) –
Return type:	None

creates a MultiBSpCurve, describing BSpline curves all containing the same number of MultiPoint. Each MultiPoint must have NbCurves Poles.

Parameters:	tabMU (AppParCurves_Array1OfMultiPoint &) – Knots (TColStd_Array1OfReal &) – Mults (TColStd_Array1OfInteger &) –
Return type:	None

creates a MultiBSpCurve, describing BSpline curves, taking control points from <SC>.

Parameters:	SC (AppParCurves_MultiCurve &) – Knots (TColStd_Array1OfReal &) – Mults (TColStd_Array1OfInteger &) –
Return type:	None

D1()¶

returns the value of the point with a parameter U on the BSpline curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 3d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt) – V1 (gp_Vec) –
Return type:	void

returns the value of the point with a parameter U on the BSpline curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 2d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt2d) – V1 (gp_Vec2d) –
Return type:	void

D2()¶

returns the value of the point with a parameter U on the BSpline curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 3d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt) – V1 (gp_Vec) – V2 (gp_Vec) –
Return type:	void

returns the value of the point with a parameter U on the BSpline curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 2d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt2d) – V1 (gp_Vec2d) – V2 (gp_Vec2d) –
Return type:	void

DumpToString()¶: AppParCurves_MultiBSpCurve_DumpToString(AppParCurves_MultiBSpCurve self) -> std::string

Knots()¶

Returns an array of Reals containing the multiplicities of curves resulting from the approximation.

Return type:	TColStd_Array1OfReal

Multiplicities()¶

Returns an array of Reals containing the multiplicities of curves resulting from the approximation.

Return type:	TColStd_Array1OfInteger

SetKnots()¶

Knots of the multiBSpCurve are assigned to <theknots>.

Parameters:	theKnots (TColStd_Array1OfReal &) –
Return type:	None

SetMultiplicities()¶

Multiplicities of the multiBSpCurve are assigned to <theMults>.

Parameters:	theMults (TColStd_Array1OfInteger &) –
Return type:	None

Value()¶

returns the value of the point with a parameter U on the BSpline curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 2d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt) –
Return type:	void

returns the value of the point with a parameter U on the BSpline curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 3d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt2d) –
Return type:	void

thisown¶: The membership flag

class AppParCurves_MultiCurve(*args)¶

Bases: object

returns an indefinite MultiCurve.

Return type:	None

creates a MultiCurve, describing Bezier curves all containing the same number of MultiPoint. An exception is raised if Degree < 0.

Parameters:	NbPol (int) –
Return type:	None

creates a MultiCurve, describing Bezier curves all containing the same number of MultiPoint. Each MultiPoint must have NbCurves Poles.

Parameters:	tabMU (AppParCurves_Array1OfMultiPoint &) –
Return type:	None

Curve()¶

returns the Pole array of the curve of range CuIndex. An exception is raised if the dimension of the curve is 2d.

Parameters:	CuIndex (int) – TabPnt (TColgp_Array1OfPnt) –
Return type:	None

returns the Pole array of the curve of range CuIndex. An exception is raised if the dimension of the curve is 3d.

Parameters:	CuIndex (int) – TabPnt (TColgp_Array1OfPnt2d) –
Return type:	None

D1()¶

returns the value of the point with a parameter U on the Bezier curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 3d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt) – V1 (gp_Vec) –
Return type:	void

returns the value of the point with a parameter U on the Bezier curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 2d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt2d) – V1 (gp_Vec2d) –
Return type:	void

D2()¶

returns the value of the point with a parameter U on the Bezier curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 3d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt) – V1 (gp_Vec) – V2 (gp_Vec) –
Return type:	void

returns the value of the point with a parameter U on the Bezier curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 2d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt2d) – V1 (gp_Vec2d) – V2 (gp_Vec2d) –
Return type:	void

Degree()¶

returns the degree of the curves.

Return type:	int

Dimension()¶

returns the dimension of the CuIndex curve. An exception is raised if CuIndex<0 or CuIndex>NbCurves.

Parameters:	CuIndex (int) –
Return type:	int

DumpToString()¶: AppParCurves_MultiCurve_DumpToString(AppParCurves_MultiCurve self) -> std::string

NbCurves()¶

Returns the number of curves resulting from the approximation of a MultiLine.

Return type:	int

NbPoles()¶

Returns the number of poles on curves resulting from the approximation of a MultiLine.

Return type:	int

Pole()¶

returns the Nieme pole of the CuIndex curve. the curve must be a 3D curve.

Parameters:	CuIndex (int) – Nieme (int) –
Return type:	gp_Pnt

Pole2d()¶

returns the Nieme pole of the CuIndex curve. the curve must be a 2D curve.

Parameters:	CuIndex (int) – Nieme (int) –
Return type:	gp_Pnt2d

SetNbPoles()¶

The number of poles of the MultiCurve will be set to <nbPoles>.

Parameters:	nbPoles (int) –
Return type:	None

SetValue()¶

sets the MultiPoint of range Index to the value <MPoint>. An exception is raised if Index <0 or Index >NbMPoint.

Parameters:	Index (int) – MPoint (AppParCurves_MultiPoint &) –
Return type:	None

Transform()¶

Applies a transformation to the curve of range <CuIndex>. newx = x + dx*oldx newy = y + dy*oldy for all points of the curve. newz = z + dz*oldz

Parameters:	CuIndex (int) – x (float) – dx (float) – y (float) – dy (float) – z (float) – dz (float) –
Return type:	None

Transform2d()¶

Applies a transformation to the Curve of range <CuIndex>. newx = x + dx*oldx newy = y + dy*oldy for all points of the curve.

Parameters:	CuIndex (int) – x (float) – dx (float) – y (float) – dy (float) –
Return type:	None

Value()¶

returns the Index MultiPoint. An exception is raised if Index <0 or Index >Degree+1.

Parameters:	Index (int) –
Return type:	AppParCurves_MultiPoint

returns the value of the point with a parameter U on the Bezier curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 2d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt) –
Return type:	void

returns the value of the point with a parameter U on the Bezier curve number CuIndex. An exception is raised if CuIndex <0 or > NbCurves. An exception is raised if the curve dimension is 3d.

Parameters:	CuIndex (int) – U (float) – Pt (gp_Pnt2d) –
Return type:	void

thisown¶: The membership flag

class AppParCurves_MultiPoint(*args)¶

Bases: object

creates an indefinite MultiPoint.

Return type:	None

constructs a set of Points used to approximate a Multiline. These Points can be of 2 or 3 dimensions. Points will be initialized with SetPoint and SetPoint2d. NbPoints is the number of 3D Points. NbPoints2d is the number of 2D Points.

Parameters:	NbPoints (int) – NbPoints2d (int) –
Return type:	None

creates a MultiPoint only composed of 3D points.

Parameters:	tabP (TColgp_Array1OfPnt) –
Return type:	None

creates a MultiPoint only composed of 2D points.

Parameters:	tabP2d (TColgp_Array1OfPnt2d) –
Return type:	None

constructs a set of Points used to approximate a Multiline. These Points can be of 2 or 3 dimensions. Points will be initialized with SetPoint and SetPoint2d. NbPoints is the total number of Points.

Parameters:	tabP (TColgp_Array1OfPnt) – tabP2d (TColgp_Array1OfPnt2d) –
Return type:	None

Dimension()¶

returns the dimension of the point of range Index. An exception is raised if Index <0 or Index > NbCurves.

Parameters:	Index (int) –
Return type:	int

DumpToString()¶: AppParCurves_MultiPoint_DumpToString(AppParCurves_MultiPoint self) -> std::string

NbPoints()¶

returns the number of points of dimension 3D.

Return type:	int

NbPoints2d()¶

returns the number of points of dimension 2D.

Return type:	int

Point()¶

returns the 3d Point of range Index. An exception is raised if Index < 0 or Index < number of 3d Points.

Parameters:	Index (int) –
Return type:	gp_Pnt

Point2d()¶

returns the 2d Point of range Index. An exception is raised if index <= number of 3d Points or Index > total number of Points.

Parameters:	Index (int) –
Return type:	gp_Pnt2d

SetPoint()¶

the 3d Point of range Index of this MultiPoint is set to <Point>. An exception is raised if Index < 0 or Index > number of 3d Points.

Parameters:	Index (int) – Point (gp_Pnt) –
Return type:	None

SetPoint2d()¶

The 2d Point of range Index is set to <Point>. An exception is raised if Index > 3d Points or Index > total number of Points.

Parameters:	Index (int) – Point (gp_Pnt2d) –
Return type:	None

Transform()¶

Applies a transformation to the curve of range <CuIndex>. newx = x + dx*oldx newy = y + dy*oldy for all points of the curve. newz = z + dz*oldz

Parameters:	CuIndex (int) – x (float) – dx (float) – y (float) – dy (float) – z (float) – dz (float) –
Return type:	None

Transform2d()¶

Applies a transformation to the Curve of range <CuIndex>. newx = x + dx*oldx newy = y + dy*oldy for all points of the curve.

Parameters:	CuIndex (int) – x (float) – dx (float) – y (float) – dy (float) –
Return type:	None

thisown¶: The membership flag

class AppParCurves_SequenceNodeOfSequenceOfMultiBSpCurve(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (AppParCurves_MultiBSpCurve &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	AppParCurves_MultiBSpCurve

thisown¶: The membership flag

class AppParCurves_SequenceNodeOfSequenceOfMultiCurve(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (AppParCurves_MultiCurve &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	AppParCurves_MultiCurve

thisown¶: The membership flag

class AppParCurves_SequenceOfMultiBSpCurve(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	None

Append()¶

Parameters:	T (AppParCurves_MultiBSpCurve &) – S (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	AppParCurves_SequenceOfMultiBSpCurve

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiBSpCurve

Clear()¶

Return type:	None

First()¶

Return type:	AppParCurves_MultiBSpCurve

InsertAfter()¶

Parameters:	Index (int) – T (AppParCurves_MultiBSpCurve &) – Index – S (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (AppParCurves_MultiBSpCurve &) – Index – S (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	None
Return type:	None

Last()¶

Return type:	AppParCurves_MultiBSpCurve

Prepend()¶

Parameters:	T (AppParCurves_MultiBSpCurve &) – S (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	AppParCurves_SequenceOfMultiBSpCurve

SetValue()¶

Parameters:	Index (int) – I (AppParCurves_MultiBSpCurve &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (AppParCurves_SequenceOfMultiBSpCurve &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiBSpCurve

thisown¶: The membership flag

class AppParCurves_SequenceOfMultiCurve(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (AppParCurves_SequenceOfMultiCurve &) –
Return type:	None

Append()¶

Parameters:	T (AppParCurves_MultiCurve &) – S (AppParCurves_SequenceOfMultiCurve &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (AppParCurves_SequenceOfMultiCurve &) –
Return type:	AppParCurves_SequenceOfMultiCurve

ChangeValue()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiCurve

Clear()¶

Return type:	None

First()¶

Return type:	AppParCurves_MultiCurve

InsertAfter()¶

Parameters:	Index (int) – T (AppParCurves_MultiCurve &) – Index – S (AppParCurves_SequenceOfMultiCurve &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (AppParCurves_MultiCurve &) – Index – S (AppParCurves_SequenceOfMultiCurve &) –
Return type:	None
Return type:	None

Last()¶

Return type:	AppParCurves_MultiCurve

Prepend()¶

Parameters:	T (AppParCurves_MultiCurve &) – S (AppParCurves_SequenceOfMultiCurve &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (AppParCurves_SequenceOfMultiCurve &) –
Return type:	AppParCurves_SequenceOfMultiCurve

SetValue()¶

Parameters:	Index (int) – I (AppParCurves_MultiCurve &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (AppParCurves_SequenceOfMultiCurve &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	AppParCurves_MultiCurve

thisown¶: The membership flag

class Handle_AppParCurves_HArray1OfConstraintCouple(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_AppParCurves_HArray1OfMultiBSpCurve(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_AppParCurves_HArray1OfMultiCurve(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_AppParCurves_HArray1OfMultiPoint(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_AppParCurves_SequenceNodeOfSequenceOfMultiBSpCurve(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_AppParCurves_SequenceNodeOfSequenceOfMultiCurve(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class SwigPyIterator(*args, **kwargs)¶

Bases: object

advance()¶

copy()¶

decr()¶

distance()¶

equal()¶

incr()¶

next()¶

previous()¶

thisown¶: The membership flag

value()¶

class appparcurves¶

Bases: object

static Bernstein()¶

Parameters:	NbPoles (int) – U (math_Vector &) – A (math_Matrix &) – DA (math_Matrix &) –
Return type:	void

static BernsteinMatrix()¶

Parameters:	NbPoles (int) – U (math_Vector &) – A (math_Matrix &) –
Return type:	void

static SecondDerivativeBernstein()¶

Parameters:	U (float) – DDA (math_Vector &) –
Return type:	void

static SplineFunction()¶

Parameters:	NbPoles (int) – Degree (int) – Parameters (math_Vector &) – FlatKnots (math_Vector &) – A (math_Matrix &) – DA (math_Matrix &) – Index (math_IntegerVector &) –
Return type:	void

thisown¶: The membership flag

appparcurves_Bernstein()¶

Parameters:	NbPoles (int) – U (math_Vector &) – A (math_Matrix &) – DA (math_Matrix &) –
Return type:	void

appparcurves_BernsteinMatrix()¶

Parameters:	NbPoles (int) – U (math_Vector &) – A (math_Matrix &) –
Return type:	void

appparcurves_SecondDerivativeBernstein()¶

Parameters:	U (float) – DDA (math_Vector &) –
Return type:	void

appparcurves_SplineFunction()¶

Parameters:	NbPoles (int) – Degree (int) – Parameters (math_Vector &) – FlatKnots (math_Vector &) – A (math_Matrix &) – DA (math_Matrix &) – Index (math_IntegerVector &) –
Return type:	void

new_instancemethod(func, inst, cls)¶

register_handle(handle, base_object)¶: Inserts the handle into the base object to prevent memory corruption in certain cases