OCC.Adaptor3d module¶

class Adaptor3d_Curve¶

Bases: object

BSpline()¶

Return type:	Handle_Geom_BSplineCurve

Bezier()¶

Return type:	Handle_Geom_BezierCurve

Circle()¶

Return type:	gp_Circ

Continuity()¶

Return type:	GeomAbs_Shape

D0()¶

Computes the point of parameter U on the curve.

Parameters:	U (float) – P (gp_Pnt) –
Return type:	void

D1()¶

Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1.

Parameters:	U (float) – P (gp_Pnt) – V (gp_Vec) –
Return type:	void

D2()¶

Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2.

Parameters:	U (float) – P (gp_Pnt) – V1 (gp_Vec) – V2 (gp_Vec) –
Return type:	void

D3()¶

Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3.

Parameters:	U (float) – P (gp_Pnt) – V1 (gp_Vec) – V2 (gp_Vec) – V3 (gp_Vec) –
Return type:	void

DN()¶

The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1.

Parameters:	U (float) – N (int) –
Return type:	gp_Vec

Degree()¶

Return type:	int

Delete()¶

Return type:	void

Ellipse()¶

Return type:	gp_Elips

FirstParameter()¶

Return type:	float

GetType()¶

Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve.

Return type:	GeomAbs_CurveType

Hyperbola()¶

Return type:	gp_Hypr

Intervals()¶

Stores in <T> the parameters bounding the intervals of continuity <S>. //! The array must provide enough room to accomodate for the parameters. i.e. T.Length() > NbIntervals()

Parameters:	T (TColStd_Array1OfReal &) – S (GeomAbs_Shape) –
Return type:	void

IsClosed()¶

Return type:	bool

IsPeriodic()¶

Return type:	bool

IsRational()¶

Return type:	bool

LastParameter()¶

Return type:	float

Line()¶

Return type:	gp_Lin

NbIntervals()¶

Returns the number of intervals for continuity <S>. May be one if Continuity(me) >= <S>

Parameters:	S (GeomAbs_Shape) –
Return type:	int

NbKnots()¶

Return type:	int

NbPoles()¶

Return type:	int

Parabola()¶

Return type:	gp_Parab

Period()¶

Return type:	float

Resolution()¶

Returns the parametric resolution corresponding to the real space resolution <R3d>.

Parameters:	R3d (float) –
Return type:	float

Trim()¶

Returns a curve equivalent of <self> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Parameters:	First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HCurve

Value()¶

Computes the point of parameter U on the curve.

Parameters:	U (float) –
Return type:	gp_Pnt

thisown¶: The membership flag

class Adaptor3d_CurveOnSurface(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_Curve

Return type:	None
Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	None

Creates a CurveOnSurface from the 2d curve <C> and the surface <S>.

Parameters:	C (Handle_Adaptor2d_HCurve2d &) – S (Handle_Adaptor3d_HSurface &) –
Return type:	None

ChangeCurve()¶

Return type:	Handle_Adaptor2d_HCurve2d

ChangeSurface()¶

Return type:	Handle_Adaptor3d_HSurface

GetCurve()¶

Return type:	Handle_Adaptor2d_HCurve2d

GetSurface()¶

Return type:	Handle_Adaptor3d_HSurface

Load()¶

Changes the surface.

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	None

Changes the 2d curve.

Parameters:	C (Handle_Adaptor2d_HCurve2d &) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_HCurve(*args, **kwargs)¶

Bases: OCC.MMgt.MMgt_TShared

BSpline()¶

Return type:	Handle_Geom_BSplineCurve

Bezier()¶

Return type:	Handle_Geom_BezierCurve

Circle()¶

Return type:	gp_Circ

Continuity()¶

Return type:	GeomAbs_Shape

Curve()¶

Returns a pointer to the Curve inside the HCurve.

Return type:	Adaptor3d_Curve

D0()¶

Parameters:	U (float) – P (gp_Pnt) –
Return type:	None

D1()¶

Parameters:	U (float) – P (gp_Pnt) – V (gp_Vec) –
Return type:	None

D2()¶

Parameters:	U (float) – P (gp_Pnt) – V1 (gp_Vec) – V2 (gp_Vec) –
Return type:	None

D3()¶

Parameters:	U (float) – P (gp_Pnt) – V1 (gp_Vec) – V2 (gp_Vec) – V3 (gp_Vec) –
Return type:	None

DN()¶

Parameters:	U (float) – N (int) –
Return type:	gp_Vec

Degree()¶

Return type:	int

Ellipse()¶

Return type:	gp_Elips

FirstParameter()¶

Return type:	float

GetCurve()¶

Returns a pointer to the Curve inside the HCurve.

Return type:	Adaptor3d_Curve

GetHandle()¶

GetType()¶

Return type:	GeomAbs_CurveType

Hyperbola()¶

Return type:	gp_Hypr

Intervals()¶

Stores in <T> the parameters bounding the intervals of continuity <S>. //! The array must provide enough room to accomodate for the parameters. i.e. T.Length() > NbIntervals()

Parameters:	T (TColStd_Array1OfReal &) – S (GeomAbs_Shape) –
Return type:	None

IsClosed()¶

Return type:	bool

IsPeriodic()¶

Return type:	bool

IsRational()¶

Return type:	bool

LastParameter()¶

Return type:	float

Line()¶

Return type:	gp_Lin

NbIntervals()¶

Parameters:	S (GeomAbs_Shape) –
Return type:	int

NbKnots()¶

Return type:	int

NbPoles()¶

Return type:	int

Parabola()¶

Return type:	gp_Parab

Period()¶

Return type:	float

Resolution()¶

Parameters:	R3d (float) –
Return type:	float

Trim()¶

Returns a curve equivalent of <self> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. //! If <First> >= <Last>

Parameters:	First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HCurve

Value()¶

Parameters:	U (float) –
Return type:	gp_Pnt

thisown¶: The membership flag

class Adaptor3d_HCurveOnSurface(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_HCurve

Return type:	None
Parameters:	C (Adaptor3d_CurveOnSurface &) –
Return type:	None

ChangeCurve()¶

Return type:	Adaptor3d_CurveOnSurface

GetHandle()¶

Set()¶

Parameters:	C (Adaptor3d_CurveOnSurface &) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_HIsoCurve(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_HCurve

Return type:	None
Parameters:	C (Adaptor3d_IsoCurve &) –
Return type:	None

ChangeCurve()¶

Return type:	Adaptor3d_IsoCurve

GetHandle()¶

Set()¶

Parameters:	C (Adaptor3d_IsoCurve &) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_HOffsetCurve(*args)¶

Bases: OCC.Adaptor2d.Adaptor2d_HCurve2d

Return type:	None
Parameters:	C (Adaptor3d_OffsetCurve &) –
Return type:	None

ChangeCurve2d()¶

Return type:	Adaptor3d_OffsetCurve

GetHandle()¶

Set()¶

Parameters:	C (Adaptor3d_OffsetCurve &) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_HSurface(*args, **kwargs)¶

Bases: OCC.MMgt.MMgt_TShared

AxeOfRevolution()¶

Return type:	gp_Ax1

BSpline()¶

Return type:	Handle_Geom_BSplineSurface

BasisCurve()¶

Return type:	Handle_Adaptor3d_HCurve

BasisSurface()¶

Return type:	Handle_Adaptor3d_HSurface

Bezier()¶

Return type:	Handle_Geom_BezierSurface

Cone()¶

Return type:	gp_Cone

Cylinder()¶

Return type:	gp_Cylinder

D0()¶

Parameters:	U (float) – V (float) – P (gp_Pnt) –
Return type:	None

D1()¶

Parameters:	U (float) – V (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) –
Return type:	None

D2()¶

Parameters:	U (float) – V (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) –
Return type:	None

D3()¶

Parameters:	U (float) – V (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) – D3U (gp_Vec) – D3V (gp_Vec) – D3UUV (gp_Vec) – D3UVV (gp_Vec) –
Return type:	None

DN()¶

Parameters:	U (float) – V (float) – Nu (int) – Nv (int) –
Return type:	gp_Vec

Direction()¶

Return type:	gp_Dir

FirstUParameter()¶

Return type:	float

FirstVParameter()¶

Return type:	float

GetHandle()¶

GetType()¶

Return type:	GeomAbs_SurfaceType

IsUClosed()¶

Return type:	bool

IsUPeriodic()¶

Return type:	bool

IsURational()¶

Return type:	bool

IsVClosed()¶

Return type:	bool

IsVPeriodic()¶

Return type:	bool

IsVRational()¶

Return type:	bool

LastUParameter()¶

Return type:	float

LastVParameter()¶

Return type:	float

NbUIntervals()¶

Parameters:	S (GeomAbs_Shape) –
Return type:	int

NbUKnots()¶

Return type:	int

NbUPoles()¶

Return type:	int

NbVIntervals()¶

Parameters:	S (GeomAbs_Shape) –
Return type:	int

NbVKnots()¶

Return type:	int

NbVPoles()¶

Return type:	int

OffsetValue()¶

Return type:	float

Plane()¶

Return type:	gp_Pln

Sphere()¶

Return type:	gp_Sphere

Surface()¶

Returns a reference to the Surface inside the HSurface.

Return type:	Adaptor3d_Surface

Torus()¶

Return type:	gp_Torus

UContinuity()¶

Return type:	GeomAbs_Shape

UDegree()¶

Return type:	int

UIntervals()¶

Parameters:	T (TColStd_Array1OfReal &) – S (GeomAbs_Shape) –
Return type:	None

UPeriod()¶

Return type:	float

UResolution()¶

Parameters:	R3d (float) –
Return type:	float

UTrim()¶

Parameters:	First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

VContinuity()¶

Return type:	GeomAbs_Shape

VDegree()¶

Return type:	int

VIntervals()¶

Parameters:	T (TColStd_Array1OfReal &) – S (GeomAbs_Shape) –
Return type:	None

VPeriod()¶

Return type:	float

VResolution()¶

Parameters:	R3d (float) –
Return type:	float

VTrim()¶

Parameters:	First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

Value()¶

Parameters:	U (float) – V (float) –
Return type:	gp_Pnt

thisown¶: The membership flag

class Adaptor3d_HSurfaceOfLinearExtrusion(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_HSurface

Return type:	None
Parameters:	S (Adaptor3d_SurfaceOfLinearExtrusion &) –
Return type:	None

ChangeSurface()¶

Return type:	Adaptor3d_SurfaceOfLinearExtrusion

GetHandle()¶

Set()¶

Parameters:	S (Adaptor3d_SurfaceOfLinearExtrusion &) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_HSurfaceOfRevolution(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_HSurface

Return type:	None
Parameters:	S (Adaptor3d_SurfaceOfRevolution &) –
Return type:	None

ChangeSurface()¶

Return type:	Adaptor3d_SurfaceOfRevolution

GetHandle()¶

Set()¶

Parameters:	S (Adaptor3d_SurfaceOfRevolution &) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_HSurfaceTool¶

Bases: object

static AxeOfRevolution(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Ax1

static BSpline(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Geom_BSplineSurface

static BasisCurve(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Adaptor3d_HCurve

static BasisSurface(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Adaptor3d_HSurface

static Bezier(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Geom_BezierSurface

static Cone(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Cone

static Cylinder(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Cylinder

static D0(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) –
Return type:	void

static D1(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) – D1u (gp_Vec) – D1v (gp_Vec) –
Return type:	void

static D2(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) –
Return type:	void

static D3(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) – D3U (gp_Vec) – D3V (gp_Vec) – D3UUV (gp_Vec) – D3UVV (gp_Vec) –
Return type:	void

static DN(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – Nu (int) – Nv (int) –
Return type:	gp_Vec

static Direction(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Dir

static FirstUParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static FirstVParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static GetType(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	GeomAbs_SurfaceType

static IsUClosed(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

static IsUPeriodic(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

static IsVClosed(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

static IsVPeriodic(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

static LastUParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static LastVParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static NbSamplesU(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – S – u1 (float) – u2 (float) –
Return type:	int
Return type:	int

static NbSamplesV(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – S – v1 (float) – v2 (float) –
Return type:	int
Return type:	int

static NbUIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – Sh (GeomAbs_Shape) –
Return type:	int

static NbVIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – Sh (GeomAbs_Shape) –
Return type:	int

static OffsetValue(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static Plane(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Pln

static Sphere(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Sphere

static Torus(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Torus

static UIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – T (TColStd_Array1OfReal &) – Sh (GeomAbs_Shape) –
Return type:	void

static UPeriod(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static UResolution(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – R3d (float) –
Return type:	float

static UTrim(*args)¶

If <First> >= <Last>

Parameters:	S (Handle_Adaptor3d_HSurface &) – First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

static VIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – T (TColStd_Array1OfReal &) – Sh (GeomAbs_Shape) –
Return type:	void

static VPeriod(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

static VResolution(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – R3d (float) –
Return type:	float

static VTrim(*args)¶

If <First> >= <Last>

Parameters:	S (Handle_Adaptor3d_HSurface &) – First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

static Value(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) –
Return type:	gp_Pnt

thisown¶: The membership flag

Adaptor3d_HSurfaceTool_AxeOfRevolution(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Ax1

Adaptor3d_HSurfaceTool_BSpline(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Geom_BSplineSurface

Adaptor3d_HSurfaceTool_BasisCurve(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Adaptor3d_HCurve

Adaptor3d_HSurfaceTool_BasisSurface(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Adaptor3d_HSurface

Adaptor3d_HSurfaceTool_Bezier(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	Handle_Geom_BezierSurface

Adaptor3d_HSurfaceTool_Cone(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Cone

Adaptor3d_HSurfaceTool_Cylinder(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Cylinder

Adaptor3d_HSurfaceTool_D0(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) –
Return type:	void

Adaptor3d_HSurfaceTool_D1(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) – D1u (gp_Vec) – D1v (gp_Vec) –
Return type:	void

Adaptor3d_HSurfaceTool_D2(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) –
Return type:	void

Adaptor3d_HSurfaceTool_D3(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) – D3U (gp_Vec) – D3V (gp_Vec) – D3UUV (gp_Vec) – D3UVV (gp_Vec) –
Return type:	void

Adaptor3d_HSurfaceTool_DN(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) – Nu (int) – Nv (int) –
Return type:	gp_Vec

Adaptor3d_HSurfaceTool_Direction(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Dir

Adaptor3d_HSurfaceTool_FirstUParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_FirstVParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_GetType(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	GeomAbs_SurfaceType

Adaptor3d_HSurfaceTool_IsUClosed(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

Adaptor3d_HSurfaceTool_IsUPeriodic(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

Adaptor3d_HSurfaceTool_IsVClosed(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

Adaptor3d_HSurfaceTool_IsVPeriodic(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	bool

Adaptor3d_HSurfaceTool_LastUParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_LastVParameter(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_NbSamplesU(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – S – u1 (float) – u2 (float) –
Return type:	int
Return type:	int

Adaptor3d_HSurfaceTool_NbSamplesV(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – S – v1 (float) – v2 (float) –
Return type:	int
Return type:	int

Adaptor3d_HSurfaceTool_NbUIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – Sh (GeomAbs_Shape) –
Return type:	int

Adaptor3d_HSurfaceTool_NbVIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – Sh (GeomAbs_Shape) –
Return type:	int

Adaptor3d_HSurfaceTool_OffsetValue(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_Plane(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Pln

Adaptor3d_HSurfaceTool_Sphere(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Sphere

Adaptor3d_HSurfaceTool_Torus(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	gp_Torus

Adaptor3d_HSurfaceTool_UIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – T (TColStd_Array1OfReal &) – Sh (GeomAbs_Shape) –
Return type:	void

Adaptor3d_HSurfaceTool_UPeriod(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_UResolution(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – R3d (float) –
Return type:	float

Adaptor3d_HSurfaceTool_UTrim(*args)¶

If <First> >= <Last>

Parameters:	S (Handle_Adaptor3d_HSurface &) – First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

Adaptor3d_HSurfaceTool_VIntervals(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – T (TColStd_Array1OfReal &) – Sh (GeomAbs_Shape) –
Return type:	void

Adaptor3d_HSurfaceTool_VPeriod(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	float

Adaptor3d_HSurfaceTool_VResolution(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – R3d (float) –
Return type:	float

Adaptor3d_HSurfaceTool_VTrim(*args)¶

If <First> >= <Last>

Parameters:	S (Handle_Adaptor3d_HSurface &) – First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

Adaptor3d_HSurfaceTool_Value(*args)¶

Parameters:	S (Handle_Adaptor3d_HSurface &) – u (float) – v (float) –
Return type:	gp_Pnt

class Adaptor3d_HVertex(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None
Parameters:	P (gp_Pnt2d) – Ori (TopAbs_Orientation) – Resolution (float) –
Return type:	None

GetHandle()¶

IsSame()¶

Parameters:	Other (Handle_Adaptor3d_HVertex &) –
Return type:	bool

Orientation()¶

Return type:	TopAbs_Orientation

Parameter()¶

Parameters:	C (Handle_Adaptor2d_HCurve2d &) –
Return type:	float

Resolution()¶

Parametric resolution (2d).

Parameters:	C (Handle_Adaptor2d_HCurve2d &) –
Return type:	float

Value()¶

Return type:	gp_Pnt2d

thisown¶: The membership flag

class Adaptor3d_InterFunc(*args)¶

Bases: OCC.math.math_FunctionWithDerivative

build the function U(t)=FixVal if Fix =1 or V(t)=FixVal if Fix=2

Parameters:	C (Handle_Adaptor2d_HCurve2d &) – FixVal (float) – Fix (int) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_IsoCurve(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_Curve

The iso is set to NoneIso.

Return type:	None

The surface is loaded. The iso is set to NoneIso.

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	None

Creates an IsoCurve curve. Iso defines the type (isoU or isoU) Param defines the value of the iso. The bounds of the iso are the bounds of the surface.

Parameters:	S (Handle_Adaptor3d_HSurface &) – Iso (GeomAbs_IsoType) – Param (float) –
Return type:	None

Create an IsoCurve curve. Iso defines the type (isoU or isov). Param defines the value of the iso. WFirst,WLast define the bounds of the iso.

Parameters:	S (Handle_Adaptor3d_HSurface &) – Iso (GeomAbs_IsoType) – Param (float) – WFirst (float) – WLast (float) –
Return type:	None

Iso()¶

Return type:	GeomAbs_IsoType

Load()¶

Changes the surface. The iso is reset to NoneIso.

Parameters:	S (Handle_Adaptor3d_HSurface &) –
Return type:	None

Changes the iso on the current surface.

Parameters:	Iso (GeomAbs_IsoType) – Param (float) –
Return type:	None

Changes the iso on the current surface.

Parameters:	Iso (GeomAbs_IsoType) – Param (float) – WFirst (float) – WLast (float) –
Return type:	None

Parameter()¶

Return type:	float

Surface()¶

Return type:	Handle_Adaptor3d_HSurface

thisown¶: The membership flag

class Adaptor3d_OffsetCurve(*args)¶

Bases: OCC.Adaptor2d.Adaptor2d_Curve2d

The Offset is set to 0.

Return type:	None

The curve is loaded. The Offset is set to 0.

Parameters:	C (Handle_Adaptor2d_HCurve2d &) –
Return type:	None

Creates an OffsetCurve curve. The Offset is set to Offset.

Parameters:	C (Handle_Adaptor2d_HCurve2d &) – Offset (float) –
Return type:	None

Create an Offset curve. WFirst,WLast define the bounds of the Offset curve.

Parameters:	C (Handle_Adaptor2d_HCurve2d &) – Offset (float) – WFirst (float) – WLast (float) –
Return type:	None

Curve()¶

Return type:	Handle_Adaptor2d_HCurve2d

Load()¶

Changes the curve. The Offset is reset to 0.

Parameters:	S (Handle_Adaptor2d_HCurve2d &) –
Return type:	None

Changes the Offset on the current Curve.

Parameters:	Offset (float) –
Return type:	None

Changes the Offset Curve on the current Curve.

Parameters:	Offset (float) – WFirst (float) – WLast (float) –
Return type:	None

Offset()¶

Return type:	float

thisown¶: The membership flag

class Adaptor3d_Surface¶

Bases: object

AxeOfRevolution()¶

Return type:	gp_Ax1

BSpline()¶

Return type:	Handle_Geom_BSplineSurface

BasisCurve()¶

Return type:	Handle_Adaptor3d_HCurve

BasisSurface()¶

Return type:	Handle_Adaptor3d_HSurface

Bezier()¶

Return type:	Handle_Geom_BezierSurface

Cone()¶

Return type:	gp_Cone

Cylinder()¶

Return type:	gp_Cylinder

D0()¶

Computes the point of parameters U,V on the surface.

Parameters:	U (float) – V (float) – P (gp_Pnt) –
Return type:	void

D1()¶

Computes the point and the first derivatives on the surface. Raised if the continuity of the current intervals is not C1.

Parameters:	U (float) – V (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) –
Return type:	void

D2()¶

Computes the point, the first and second derivatives on the surface. Raised if the continuity of the current intervals is not C2.

Parameters:	U (float) – V (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) –
Return type:	void

D3()¶

Computes the point, the first, second and third derivatives on the surface. Raised if the continuity of the current intervals is not C3.

Parameters:	U (float) – V (float) – P (gp_Pnt) – D1U (gp_Vec) – D1V (gp_Vec) – D2U (gp_Vec) – D2V (gp_Vec) – D2UV (gp_Vec) – D3U (gp_Vec) – D3V (gp_Vec) – D3UUV (gp_Vec) – D3UVV (gp_Vec) –
Return type:	void

DN()¶

Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V). Raised if the current U interval is not not CNu and the current V interval is not CNv. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0.

Parameters:	U (float) – V (float) – Nu (int) – Nv (int) –
Return type:	gp_Vec

Delete()¶

Return type:	void

Direction()¶

Return type:	gp_Dir

FirstUParameter()¶

Return type:	float

FirstVParameter()¶

Return type:	float

GetType()¶

Returns the type of the surface : Plane, Cylinder, Cone, Sphere, Torus, BezierSurface, BSplineSurface, SurfaceOfRevolution, SurfaceOfExtrusion, OtherSurface

Return type:	GeomAbs_SurfaceType

IsUClosed()¶

Return type:	bool

IsUPeriodic()¶

Return type:	bool

IsURational()¶

Return type:	bool

IsVClosed()¶

Return type:	bool

IsVPeriodic()¶

Return type:	bool

IsVRational()¶

Return type:	bool

LastUParameter()¶

Return type:	float

LastVParameter()¶

Return type:	float

NbUIntervals()¶

Returns the number of U intervals for continuity <S>. May be one if UContinuity(me) >= <S>

Parameters:	S (GeomAbs_Shape) –
Return type:	int

NbUKnots()¶

Return type:	int

NbUPoles()¶

Return type:	int

NbVIntervals()¶

Returns the number of V intervals for continuity <S>. May be one if VContinuity(me) >= <S>

Parameters:	S (GeomAbs_Shape) –
Return type:	int

NbVKnots()¶

Return type:	int

NbVPoles()¶

Return type:	int

OffsetValue()¶

Return type:	float

Plane()¶

Return type:	gp_Pln

Sphere()¶

Return type:	gp_Sphere

Torus()¶

Return type:	gp_Torus

UContinuity()¶

Return type:	GeomAbs_Shape

UDegree()¶

Return type:	int

UIntervals()¶

Returns the intervals with the requested continuity in the U direction.

Parameters:	T (TColStd_Array1OfReal &) – S (GeomAbs_Shape) –
Return type:	void

UPeriod()¶

Return type:	float

UResolution()¶

Returns the parametric U resolution corresponding to the real space resolution <R3d>.

Parameters:	R3d (float) –
Return type:	float

UTrim()¶

Returns a surface trimmed in the U direction equivalent of <self> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Parameters:	First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

VContinuity()¶

Return type:	GeomAbs_Shape

VDegree()¶

Return type:	int

VIntervals()¶

Returns the intervals with the requested continuity in the V direction.

Parameters:	T (TColStd_Array1OfReal &) – S (GeomAbs_Shape) –
Return type:	void

VPeriod()¶

Return type:	float

VResolution()¶

Returns the parametric V resolution corresponding to the real space resolution <R3d>.

Parameters:	R3d (float) –
Return type:	float

VTrim()¶

Returns a surface trimmed in the V direction between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Parameters:	First (float) – Last (float) – Tol (float) –
Return type:	Handle_Adaptor3d_HSurface

Value()¶

Computes the point of parameters U,V on the surface.

Parameters:	U (float) – V (float) –
Return type:	gp_Pnt

thisown¶: The membership flag

class Adaptor3d_SurfaceOfLinearExtrusion(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_Surface

Return type:	None

The Curve is loaded.

Parameters:	C (Handle_Adaptor3d_HCurve &) –
Return type:	None

Thew Curve and the Direction are loaded.

Parameters:	C (Handle_Adaptor3d_HCurve &) – V (gp_Dir) –
Return type:	None

Load()¶

Changes the Curve

Parameters:	C (Handle_Adaptor3d_HCurve &) –
Return type:	None

Changes the Direction

Parameters:	V (gp_Dir) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_SurfaceOfRevolution(*args)¶

Bases: OCC.Adaptor3d.Adaptor3d_Surface

Return type:	None

The Curve is loaded.

Parameters:	C (Handle_Adaptor3d_HCurve &) –
Return type:	None

The Curve and the Direction are loaded.

Parameters:	C (Handle_Adaptor3d_HCurve &) – V (gp_Ax1) –
Return type:	None

Axis()¶

Return type:	gp_Ax3

Load()¶

Changes the Curve

Parameters:	C (Handle_Adaptor3d_HCurve &) –
Return type:	None

Changes the Direction

Parameters:	V (gp_Ax1) –
Return type:	None

thisown¶: The membership flag

class Adaptor3d_TopolTool(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None
Parameters:	Surface (Handle_Adaptor3d_HSurface &) –
Return type:	None

BSplSamplePnts()¶

compute the sample-points for the intersections algorithms by adaptive algorithm for BSpline surfaces - is used in SamplePnts theDefl is a requred deflection theNUmin, theNVmin are minimal nb points for U and V.

Parameters:	theDefl (float) – theNUmin (int) – theNVmin (int) –
Return type:	void

Classify()¶

Parameters:	P (gp_Pnt2d) – Tol (float) – ReacdreOnPeriodic (bool) – default value is Standard_True
Return type:	TopAbs_State

ComputeSamplePoints()¶

Return type:	void

DomainIsInfinite()¶

Return type:	bool

Edge()¶

Return type:	Standard_Address

GetHandle()¶

Has3d()¶

answers if arcs and vertices may have 3d representations, so that we could use Tol3d and Pnt methods.

Return type:	bool

Identical()¶

Returns True if the vertices V1 and V2 are identical. This method does not take the orientation of the vertices in account.

Parameters:	V1 (Handle_Adaptor3d_HVertex &) – V2 (Handle_Adaptor3d_HVertex &) –
Return type:	bool

Init()¶

Return type:	void

InitVertexIterator()¶

Return type:	void

Initialize()¶

Return type:	void
Parameters:	S (Handle_Adaptor3d_HSurface &) – Curve (Handle_Adaptor2d_HCurve2d &) –
Return type:	void
Return type:	void

IsThePointOn()¶

Parameters:	P (gp_Pnt2d) – Tol (float) – ReacdreOnPeriodic (bool) – default value is Standard_True
Return type:	bool

IsUniformSampling()¶

Returns true if provide uniform sampling of points.

Return type:	bool

More()¶

Return type:	bool

MoreVertex()¶

Return type:	bool

NbSamples()¶

compute the sample-points for the intersections algorithms

Return type:	int

NbSamplesU()¶

compute the sample-points for the intersections algorithms

Return type:	int

NbSamplesV()¶

compute the sample-points for the intersections algorithms

Return type:	int

Next()¶

Return type:	void

NextVertex()¶

Return type:	void

Orientation()¶

If the function returns the orientation of the arc. If the orientation is FORWARD or REVERSED, the arc is a ‘real’ limit of the surface. If the orientation is INTERNAL or EXTERNAL, the arc is considered as an arc on the surface.

Parameters:	C (Handle_Adaptor2d_HCurve2d &) –
Return type:	TopAbs_Orientation

Returns the orientation of the vertex V. The vertex has been found with an exploration on a given arc. The orientation is the orientation of the vertex on this arc.

Parameters:	V (Handle_Adaptor3d_HVertex &) –
Return type:	TopAbs_Orientation

Pnt()¶

returns 3d point of the vertex V

Parameters:	V (Handle_Adaptor3d_HVertex &) –
Return type:	gp_Pnt

SamplePnts()¶

compute the sample-points for the intersections algorithms by adaptive algorithm for BSpline surfaces. For other surfaces algorithm is the same as in method ComputeSamplePoints(), but only fill arrays of U and V sample parameters; theDefl is a requred deflection theNUmin, theNVmin are minimal nb points for U and V.

Parameters:	theDefl (float) – theNUmin (int) – theNVmin (int) –
Return type:	void

SamplePoint()¶

Parameters:	Index (int) – P2d (gp_Pnt2d) – P3d (gp_Pnt) –
Return type:	void

Tol3d()¶

returns 3d tolerance of the arc C

Parameters:	C (Handle_Adaptor2d_HCurve2d &) –
Return type:	float

returns 3d tolerance of the vertex V

Parameters:	V (Handle_Adaptor3d_HVertex &) –
Return type:	float

UParameters()¶

return the set of U parameters on the surface obtained by the method SamplePnts

Parameters:	theArray (TColStd_Array1OfReal &) –
Return type:	None

VParameters()¶

return the set of V parameters on the surface obtained by the method SamplePnts

Parameters:	theArray (TColStd_Array1OfReal &) –
Return type:	None

Value()¶

Return type:	Handle_Adaptor2d_HCurve2d

Vertex()¶

Return type:	Handle_Adaptor3d_HVertex

thisown¶: The membership flag

class Handle_Adaptor3d_HCurve(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HCurveOnSurface(*args)¶

Bases: OCC.Adaptor3d.Handle_Adaptor3d_HCurve

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HIsoCurve(*args)¶

Bases: OCC.Adaptor3d.Handle_Adaptor3d_HCurve

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HOffsetCurve(*args)¶

Bases: OCC.Adaptor2d.Handle_Adaptor2d_HCurve2d

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HSurface(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HSurfaceOfLinearExtrusion(*args)¶

Bases: OCC.Adaptor3d.Handle_Adaptor3d_HSurface

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HSurfaceOfRevolution(*args)¶

Bases: OCC.Adaptor3d.Handle_Adaptor3d_HSurface

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_HVertex(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_Adaptor3d_TopolTool(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class SwigPyIterator(*args, **kwargs)¶

Bases: object

advance()¶

copy()¶

decr()¶

distance()¶

equal()¶

incr()¶

next()¶

previous()¶

thisown¶: The membership flag

value()¶

register_handle(handle, base_object)¶: Inserts the handle into the base object to prevent memory corruption in certain cases