Last updated: 2018-06-05

workflowr checks: (Click a bullet for more information)
  • R Markdown file: up-to-date

    Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

  • Environment: empty

    Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

  • Seed: set.seed(1)

    The command set.seed(1) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

  • Session information: recorded

    Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

  • Repository version: d913db7

    Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

    Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
    
    Ignored files:
        Ignored:    .sos/
        Ignored:    data/.sos/
        Ignored:    output/MatrixEQTLSumStats.Portable.Z.coved.K3.P3.lite.single.expanded.V1.loglik.rds
        Ignored:    workflows/.ipynb_checkpoints/
        Ignored:    workflows/.sos/
    
    Untracked files:
        Untracked:  analysis/files.txt
        Untracked:  fastqtl_to_mash_output/
        Untracked:  gtex6_workflow_output/
    
    Unstaged changes:
        Modified:   analysis/gtex.Rmd
    
    
    Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
Expand here to see past versions:
    File Version Author Date Message
    Rmd d913db7 Peter Carbonetto 2018-06-05 wflow_publish(“SharingSign.Rmd”)
    html d913db7 Peter Carbonetto 2018-06-05 wflow_publish(“SharingSign.Rmd”)


The plot generated here summarizes eQTL sharing by sign between all pairs of tissues. Compare against Supplementary Figure 4 of the paper.

Set up environment

First, we load the lattice package used for generating the plot below.

library(lattice)

Load data and mash results

In the next code chunk, we load some GTEx summary statistics, as well as some of the results generated from the mash analysis of the GTEx data.

out      <- readRDS("../data/MatrixEQTLSumStats.Portable.Z.rds")
maxb     <- out$test.b
maxz     <- out$test.z
out      <-readRDS(paste("../output/MatrixEQTLSumStats.Portable.Z.coved.K3.P3",
                         "lite.single.expanded.V1.posterior.rds",sep = "."))
pm.mash  <- out$posterior.means
lfsr.all <- out$lfsr
standard.error <- maxb/maxz
pm.mash.beta <- pm.mash*standard.error

Compute sharing-by-sign statistics

For each pair of tissues, compute the estimated proportion of eQTLs that have effect sizes that are the same sign.

thresh=0.05
pm.mash.beta=pm.mash.beta[rowSums(lfsr.all<0.05)>0,]
lfsr.mash=lfsr.all[rowSums(lfsr.all<0.05)>0,]
shared.fold.size=matrix(NA,nrow = ncol(lfsr.mash),ncol=ncol(lfsr.mash))
colnames(shared.fold.size)=rownames(shared.fold.size)=colnames(maxz)
for(i in 1:ncol(lfsr.mash)){
  for(j in 1:ncol(lfsr.mash)){
    sig.row=which(lfsr.mash[,i]<thresh)
    sig.col=which(lfsr.mash[,j]<thresh)
    a=(union(sig.row,sig.col))
    quotient=(pm.mash.beta[a,i]/pm.mash.beta[a,j])
    shared.fold.size[i,j]=mean(quotient > 0)
  }
}

Plot heatmap of sharing by sign

Generate the heatmap using the “levelplot” function from the lattice package.

all.tissue.order = read.table("../data/alltissueorder.txt")[,1]
clrs <- colorRampPalette(rev(c("#D73027","#FC8D59","#FEE090","#FFFFBF",
                               "#E0F3F8","#91BFDB","#4575B4")))(64)
lat=shared.fold.size[rev(all.tissue.order),rev(all.tissue.order)]
lat[lower.tri(lat)] <- NA
n=nrow(lat)
print(levelplot(lat[n:1,],col.regions = clrs,xlab = "",ylab = "",
      colorkey = TRUE))

Expand here to see past versions of heatmap-sharing-sign-1.png:
Version Author Date
d913db7 Peter Carbonetto 2018-06-05

Session information

sessionInfo()
# R version 3.4.3 (2017-11-30)
# Platform: x86_64-apple-darwin15.6.0 (64-bit)
# Running under: macOS High Sierra 10.13.4
# 
# Matrix products: default
# BLAS: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRblas.0.dylib
# LAPACK: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRlapack.dylib
# 
# locale:
# [1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
# 
# attached base packages:
# [1] stats     graphics  grDevices utils     datasets  methods   base     
# 
# other attached packages:
# [1] lattice_0.20-35
# 
# loaded via a namespace (and not attached):
#  [1] workflowr_1.0.1.9000 Rcpp_0.12.16         digest_0.6.15       
#  [4] rprojroot_1.3-2      R.methodsS3_1.7.1    grid_3.4.3          
#  [7] backports_1.1.2      git2r_0.21.0         magrittr_1.5        
# [10] evaluate_0.10.1      stringi_1.1.7        whisker_0.3-2       
# [13] R.oo_1.21.0          R.utils_2.6.0        rmarkdown_1.9       
# [16] tools_3.4.3          stringr_1.3.0        yaml_2.1.18         
# [19] compiler_3.4.3       htmltools_0.3.6      knitr_1.20

This reproducible R Markdown analysis was created with workflowr 1.0.1.9000